Components & Products

Chemical Substances RoHs

 China RoHS Order No. 32 of the Ministry of Industry and Information Technology

China RoHS 2 is covering the product scope from electronic information products (EIP) to electrical and electronic products. They refer to the devices and accessory products with rated working electrical voltages that do not exceed 1500V direct current and do not exceed 1000V alternating current and function by means of current or electromagnetic fields and generate, transmit and measure such currents and electromagnetic fields. Batteries are also within the scope.

A list of electrical and electronic products will be added to the catalogue of electrical and electronic products subject to compliance management (China RoHS compliance management catalogue). Products listed in the Catalogue are subject to mandatory compliance with hazardous substance restriction limits. Non-listed products or parts which contain certain hazardous substances exceeding above limits can still be sold in China. However, the affected products need to be marked.

Restriction of the use of hazardous substances in electrical and electronic products to meet the standard management catalog.


GB/T 26572-2011: Requirements of concentration limits for certain restricted substances in electrical and electronic products

Substances restricted by ROHS 


Annex II of the RoHS Directive: Substances subject to limitations in article 4, paragraph 1, and maximum tolerated concentrations by weight in uniform materials.

Dangerous Substances

Maximum Concentration

Lead 0.1%

Mercury 0.1%

Cadmium 0.01%

Hexavalent Chromium 0.1%

Polybromobiphenyls (PBB) 0.1%

Polybromodiphenylethers (PBDE) 0.1%

Marking and instructions


China RoHS 2 requires that all electronic and electrical products that are sold in the People’s Republic of China be marked with one of the following two logos depending on whether if they contain any hazardous substances exceeding official concentration limits.

RoHS labelling requirements set by SJ/T 11364-2014

  • Green symbol with "e" in it: This product does not contain any hazardous substances exceeding concentration limits and is a green environmentally friendly product which can be recycled;

  • Orange symbol with a number in it: This product contains certain hazardous substances and can be used safely during its environmental protection use period (as indicated by the number in the centre) which should enter into the recycling system after its environmental protection use period.

    • 10 inside the round indicate 10 years.

Environmental Protection Use Period refers to the period during which the hazardous substances contained in the electronic and electrical products will not leak or mutate suddenly under normal operating conditions and will not result in serious environmental pollution or cause serious bodily injury to the user or damage to their assets during the normal use by the user of the electrical and electronic products.

A table summarizing the substances present and their locations must be provided with the product. This table can take the form of a paper document (ideally in the user manual) or an electronic document (CD or website from the moment the user is informed where to find this table)

Exemption from CCC exist for RoHs:

Your product is outside CCC catalogue or Exempted from CCC for specific purposes in that case the a CCC exemption letter can be requested to CCIC STLQ is order to cover specific usage and conditions. Please see below link our exemption purposes.

The exemption purpose is simple and rather simplify process to import your product in China market.

CCIC STLQ can take care of all CCC and Voluntary certification procedures by representing you directly as Agent for China authorities and competent body for inspection, testing and certification,

You want to apply to CCC RoHs application please contact us.

Contact Us: